House washing · Gresham, OR
House washing in Gresham
Gresham Wash Works soft washes houses across Gresham and east county: vinyl, fiber cement, wood lap and T1-11 siding, plus the trim, eaves and gutters. In a place with over 40 inches of rain a year, the green film on a north wall or along the bottom courses isn't dirt; it's algae and mildew growing on the siding, and it comes back unless it's killed, not just knocked off.
A house wash typically runs $260–$590. Siding gets a soft wash: low pressure and a cleaning solution, not a high-pressure blast.
Soft washing vs. pressure washing your siding
Soft washing kills the growth with a cleaning solution at low pressure and rinses it away; pressure washing tries to blast it off, which is how siding gets damaged.
A soft wash solution is a mild mix with a surfactant that clings to the siding long enough to kill the algae and mildew at the root. Then it's rinsed off at garden-hose pressure. High pressure on siding drives water up behind the laps, raises the grain on wood, and can leave stripes where the wand passed. Our take: the only thing that should get real pressure at your house is the concrete.

How each siding gets washed
Examples of surfaces and methods — there are several options available, and the final approach will be reviewed and selected with you.
Vinyl
A soft brush and low pressure, washed from the bottom up and rinsed from the top down. The wand stays back and angled down so water doesn't get driven up behind the laps.
Fiber cement
Fiber cement makers call for a low-pressure spray and a soft brush. If a pressure washer is used at all: under 1,500 psi, a wide fan tip, and at least 6 feet from the wall. Damage from harder cleaning may not be covered by the siding warranty.
Wood lap and T1-11
Older wood and plywood siding is soft. High pressure raises the grain and drives water into the panel edges, so it gets a soft wash and a gentle rinse.

What a house wash includes
- Step 1
Walk the house
Siding type, stories, the green spots, windows and doors to protect, and where the water will run.
- Step 2
Soak the plants
Beds and shrubs get soaked with plain water first, so they don't take up the cleaning solution.
- Step 3
Apply the soft wash
A mild cleaning solution at low pressure, top to bottom, left to dwell long enough to kill the algae and mildew rather than just bleach it.
- Step 4
Rinse and re-rinse
Siding rinsed from the top down, then the plants rinsed again. Wash water is kept out of the street drain.
- 1Roof shingles
- 2Gutter face
- 3Soffit and fascia
- 4Lap siding
- 5Window trim
- 6Downspout and landscape bed
- 7Foundation and splash zone
- 8Front walk
- 9Driveway
Gutter stripes and eaves
Black vertical stripes on the face of a gutter are stubborn, and pressure alone rarely moves them.


They come off with a gutter brightener and a soft scrub, and they come off best on a warm day, above about 60°F. Blasting them with pressure can strip the gutter's paint. Some older stripes never fully come off, so we'll tell you that before anything starts. Eaves and soffits get the same soft wash as the siding.
When to wash a house in Gresham
July through September, the driest months of the year here.
July averages about half an inch of rain and August a little more, so siding dries fast and the cleaning solution gets its full dwell time. Plan on a wash every year or two, more often on a shaded north wall under firs.
Wash water and your plants
Wash water stays out of the street drain, and your beds get soaked before and rinsed after.
Gresham's code bars discharges to the storm system that carry a sheen, solids or discoloration, or that fall outside a pH of 6.5 to 8.5. A cleaning solution's runoff qualifies, so it gets diluted, kept on the property, or diverted to landscaping.
Deck cleaning: wood and composite
A wood deck gets a soft, low-pressure wash, never a blast: high pressure gouges the boards and raises the grain. A deck typically runs $100–$350.
Cedar and pine are soft woods. A narrow tip, or a wand held a few inches off the board, cuts into the wood fibers and leaves a fuzzy, splintered surface that grays and takes on water faster. So a wood deck gets a cleaning solution that kills the algae and mildew, a soft brush where the green has settled into the grain, and a low-pressure rinse with a wide fan tip, run along each board with the grain. Composite decking makers set their own limits on pressure, tip and distance, and going past them can void the board warranty, so composite is cleaned to its maker's care guide. Railings, stairs and the ledger area get the same wash, and the plants below get soaked first.

In east county's wet season, the green film on a shaded deck turns slick long before it looks bad, so a deck usually gets washed with the house. By the square foot, deck cleaning typically runs about $0.30–$0.60.
House washing cost in Gresham
House washing costs range depending on a number of factors, but a house wash typically runs $260–$590.
- House wash: $260–$590.
- By the siding area: about $0.25–$0.40 per square foot.
- Deck, wood or composite: $100–$350.
- Gutter brightening: priced at the walkthrough.
Prices vary with the surface, the size and condition of the job and the treatment you choose. Your number is confirmed at the walkthrough, never fixed on this page.
These are items that could affect the price: house size and stories, siding type, how much growth there is, access around the house, and the plants and beds to protect. We will walk through all of them with you and provide an itemized estimate. All surfaces are on the Gresham pressure washing prices page.
House washing questions
How much does house washing cost in Gresham?
A house wash typically runs $260–$590, or about $0.25–$0.40 per square foot of siding. Two stories, wood siding or heavy growth sit at the top of the range.
Is soft washing safe for vinyl siding?
Yes. That's what it's for: low pressure and a cleaning solution do the work, so no water gets forced up behind the laps.
Can you pressure wash fiber cement siding?
Gently, if at all. Fiber cement makers call for under 1,500 psi, a wide fan tip and at least 6 feet of distance, and harder cleaning can void the siding warranty. A soft wash is the safer choice.
Can you get the black stripes off my gutters?
Usually, with a gutter brightener and some scrubbing; pressure alone rarely touches them and can strip the gutter paint. Some older stripes never fully come off, and we'll tell you that up front.
Can you pressure wash my wood deck?
Not with high pressure. It gouges soft woods like cedar and pine and raises the grain. A wood deck gets a cleaning solution, a soft brush and a low-pressure rinse with a wide fan tip along the boards. A deck typically runs $100–$350.
Do I need a permit or license for house washing?
We confirm the permit and licensing needs for your job before work starts. Two rules always apply: wash water can't go down the storm drain under Gresham's code, and any moss or algae treatment takes an Oregon pesticide license. We do this work under the licensing it requires.
Get a free house washing quote
We'll respond within the same business day and schedule a time to come out, look at what needs washing, and talk you through the process. Prefer the phone? (971) 225-3168
Where we wash
Gresham is home base, and we cover the rest of east county too.
